Products:
- Suspended mining locomotive
- Mining railway locomotive
- Ground rail locomotive
- Roadheading machine
- Coal crushers
- Mining diesel manipulators
- Electro-hydraulic manipulator
- Hydraulic transport vehicle
- Arched mine support trimmer
-
-SK1
- Mine support bender
- Flameproof alternator
- Universal flameproof lamp
- Non-explosive key controller
- Hydraulic distributor
- Set of cabins for personal transport
- Braking carriages for heavy suspension lines
-
-BTs
- Suspension line
- Beam trolleys
-
-NV5
- Diesel and electric rack rail system
Beam trolley NV5
The beam trolley NV5 is designated for suspending and transporting loads on suspension tracks using the bearing profile “I-155”.
The beam trolley has a modular design, enabling assembly of two basic versions – with drawing anchorages and without drawing anchorages. The basic structural element of the beam trolley NV5 is a “hinge” in the central part, which the sides are fixed to using connecting pins. You can also put drawing anchorages on the connecting pins for 120 kN drawing allowing for conventional connecting rods to be connected.
With its design, the beam trolley meets the requirements stipulated for equipment group I (mining) category M2 and equipment group II (ground operations) category 2 as per the European Parliament and Council Directive 94/9/EC and Governmental Decree No. 23/2003 Coll., as amended, meeting the conditions for use in environment with risk of explosion of methane and coal dust up to degree of SNM2 as per section 232 of ČBÚ Decree No. 22/1989 Coll., as amended.
| Technical parameters | ||
|---|---|---|
| Modifications | NV5 | NV5-2 |
| Maximum load | 4000 kg | 4000 kg |
| Maximum drawing force | 120 kN | --- |
| Service weight | 43 kg | 55 kg |
| Maximum track gradient | ± 30° | ± 30° |
| Max. horizontal curve radius | 4 m | 4 m |
| Max. vertical curve radius | 8 m | 8 m |
| Suspension track type | with bearing profile I 155 | swith bearing profile I 155 |
Dimensional drawing of beam trolley NV5 (with draw anchorages)
Dimensional drawing of beam trolley NV5-2 (without draw anchorages)
documentation for download
This project is financed by European Fund for Regional Development and Department of Trade and Industry of Czech Republic.